Laminated glass

Architectural Laminated glass is a type of safety glass that is made by laminating an interlayer Film between two panes of glass at high temperature and pressure using an autoclave. PVB Interlayer is mainly used for Laminated Glass.

There are some types of interlayers made from other materials such as EVA (Ethylene-Vinyl Acetate). PVB interlayer has the unique advantage of adhesion to the glass, penetration and Impact resistance.
We manufacture many type of architectural laminated glass or Custom made Laminated Glass:

Custom made Laminated Glass by Gradient Glass and Mirror Company is your turnkey architectural New York glass supplier,EVA Laminated glass,PVB laminated glass for:

Our Architectural Laminated Glass used for commercial and residential projects in New York and North America.
Make your imaginations become a reality with Gradient Glass and Mirror Company. Welcome contact us for more info or inquiries

EVA LAMINATED GLASS:

EVA interlayer Custom Laminated Glass cost performance is higher. Compared with PVB and SGP, EVA has better fluidity, lower melting temperature and can be processed at temperature up to 110 °C.
EVA has a good fluidity of the film layer, and can be subjected to a process such as wire drawing and engraving in the film layer to produce a beautiful decorative glass with a pattern,mirror and more.EVA has good water resistance, but its UV resistance is weak. It is easy to yellow and black in long-term sun exposure, so it is mainly used for indoor partitions.

PVB LAMINATED GLASS:

PVB is a widely used sandwich material for architectural glass.
The storage process and processing method of PVB interlayer is more complicated than EVA, and the requirements for temperature and humidity are high. When PVB is processed, the temperature is controlled between 18 °C and 23 °C, the relative humidity is controlled at 18-23%, and the PVB water content is maintained at 0.4%-0.6%. After preheating rolling or vacuuming, The autoclave was used for heat preservation and pressure keeping, the autoclave temperature was 120-130 ° C, the pressure was 1.0-1.3 MPa, and the time was 30-60 min. For more information regarding your inquiry please contact us via email.